2022 Kuhn GMD 355

Call for Price

Call for Price

Overview

Availability Brochure
Year2022
MakeKuhn
ModelGMD 355

Product Features

Description

2021 Kuhn GMD 355

A Well Rounded and Versatile Disc Mower



The KUHN GMD 355 mounted disc mower is great for operators who are looking for versatility, high cutting performance and durability.



The KUHN GMD 355 disc mower provides operators with increased durability, enhanced features and a cleaner look for years of low maintenance hay production. Equipped with KUHN's 100 Series cutterbar, the GMD 355 has proven cutting performance in the field. It has also been reinforced with heavy-duty outer bearing stations to support both ends of the cutterbar. These supports greatly improve the durability of the cutterbar, especially when it is used in difficult conditions. The swath wheel improves crop flow by providing positive engagement of the crop. The spring suspension of the cutting unit has adaptive flotation for the cutterbar to float over uneven terrain. The mechanical breakaway protects the mower along fence lines and field edges in case an obstacle is struck.



Features may include:



Direct Drive Design

* The GMD 355 mower has a direct drive through the first disc into the 100 Series cuttbar. This allows more clearance to not catch crop from previously made windrows.

Proven 100 Series Cutterbar

* Due to the high reliability, excellent crop cutting, and overall adaptability to varying terrains, the 100 Series cutterbar is a staple in the Premium Series. See for yourself by taking a closer look at what the 100 Series cutterbar has to offer



* Withstands the highest loads: special high-capacity bearings fitted in a one-piece sealed housing are not subject to distortion.



* Increased service life: disc pinion shaft bearings endure radial forces for maximum bearing life. This optimum position improves the load balance.



* Protection should an obstacle be struck: the Protectadrive® system is designed to protect the cutterbar gear train and minimizes the risk of downtime.



* High-wear resistance: knife attachment hardware is fully protected. For added safety, heat-treated steel cups are welded to the disc.



* Minimum wear or distortion risks: idler gear fasteners are located in heat treated steel cups. Correct alignment is ensured without the risk of distortion.



* Long-term reliability: large-diameter gearwheels in high-tensile forged steel with reinforced teeth.



* Perfect sealing: top-quality o-rings used on cutterbar bearing housings for a perfect, leak-free seal.

Swath Wheel

* The GMD 355 mower comes with an adjustable outside swath wheel. The swath wheel improves crop flow by providing more positive engagement of crop to leave the cutterbar, especially in taller crops. Additionally, the swath wheel allows a greater degree of swath width adjustment and leaves a clearly defined edge for the next pass.

Cutterbar Frame Support

* The cutterbar and curtain frame are supported on the outside of the machine. The support frame is equipped with two integrated bumpers to reduce shocks from the cutterbar when working in rough field conditions.

Protectadrive® Safety

* Every minute saved during the hay season is precious. Ultimate protection, from the externally removable Protectadrive disc bearing stations, provides maximum reliability and quick service. In the event of an impact between a disc and an obstacle, the shaft holding the disc can shear just above the bearing. This is thanks to its carefully dimensioned shear groove. As a result, the gear teeth are protected.

Features
  • Number of discs: 9
  • Blade retention system: Fast-Fit
  • Unlocking system from the tractor cab: via rope
  • Headland turn position: By integrated hydraulic cylinder and hydraulic limiter
Specifications
  • Trim Name: Base
  • Generic Type (Primary): Disc Mowers
  • PTO Type: Primary: 1-3/8" - 21-spline | Secondary: Friction slip clutch standard
  • PTO Power, Rated Engine Speed: 540 RPM | Minimum PTO power requirement: 75 hp (56 kW)
  • Suspension: Cutterbar: spring
  • Tires, Rear Specification: 9.5L - 15
  • Hydraulic Type: Required tractor hydraulic connections: 1 SA with float
  • Hitch/Type: Cat. 2, 3-point mounted
  • Dimensions: Mowing angle: +35°, -25° | Transport position: 120°
  • Width, Working Position: 11'6" (3.5 m)
  • Transport Width: 6'3" (1.91 m)
  • Transport Height: 12'9" (3.9 m)
  • Width: Average swath: 9'2" (2.8 m)
  • Height: Cutting: 1.1" - 2.8" (30 - 70 mm)
  • Weight: Machine approx.: 1,930 lb. (1,875 kg)
  • Knife Quantity: 18
  • Cutterbar Type: 100 Series

General

Working Width 11 ft. 6 in. (3.5 m)
Width 6 ft. 3 in. (1.91 m)
Weight Machine approx.: 1,930 lb. (1,875 kg)

Shopping Tools